The bow is pretty easy to make and again you can make it as puffy as you want just by adjusting the amount of stuffing you use.
Supplies needed for bow:
- 12″x16″ Sequin/Satin fabric
- 3″x4″ Sequin/Satin fabric
- Glue gun and glue sticks
1.Lay fabric horizontally on table and add two small pieces of batting about 2″ apart.
2.Place a 3″ line of glue in middle of sequin fabric between batting. Fold left side over making sure to connect with the glue. Press down.
3.Place a 3″ line of glue on top of folded fabric, fold right side over and press down where the glue is.
4.Place a 3″ line of glue in the middle of bow and fold bottom up over glue and press down,
5.Repeat step 4 but placing a line of hot glue along the edge of the folded fabric, then fold the top down over the glue and press.
6.Gather bow together and put small dots of hot glue in the middle where folded on both front and back of bow.
Thank you pretty much for this complete tutorial, hope it’s easy as it seems. We are 3 college girls from Mexico, who loves Disney, so we have just a few minnie mouse ears from Disneyland. This tutorial help us so much, we’ll put in practice. Again, thank you !!
Jessie beck says
I’m so excited to try these out for the next time I’m in the parks! Such a great post:)
Hey Laura, what colour felt would you recommend layering the Rose Gold sequin fabric with? Pink?
Yes I used a light pink to line the rose gold ears!
Hi, roughly how wide are the headbands that you use? Thanks!!
Rebecca the headbands I use are about one inch wide.
Brenda Angell says
I worry about the sequins messing up my sewing machine, will they?
Brenda,I had no problem with the sequins and my sewing machine.
I’m excited to try these, Thank you for sharing!
Diana Birlean says
Are the headbands you got from Amazon bigger than the ones used by Disney? My problem is that the ones from Disney squeeze my head and I can’t wear them longer than to take a quick picture. Thank you for the great tutorial.
Diana, I have the same problem and honestly it is just trial and error as to the size of the headband. If I were you I would use a headband you already own that doesn’t hurt your head. If that is an option.
These are beautiful where did you purchase your sequin fabrics ?
Thank you! I have listed resources on the last page.
Love this!!!! I mistakenly ordered 1/2″ Headbands from Amazon and they are def not wide enough!!! Can you tell me which headbands you ordered? Are they satin covered and do you get the ones with teeth? Thank you so much!!!
Thank you for sharing – I am so excited to make these! I was just wondering if the ears stay up well or if they flop around. I have made ears with fabric over cardboard and they were very sturdy, so I’m wondering how these will be once they’re all put together.
Katie, They stand very well just like the ones you buy in the Parks!
Dot, I use one inch wide headbands and I pick them up where ever I can find them! I have even found some at the dollar store! Good luck!
What size felt did you buy. The 4×4 or 8×12
I used the 8″x12″.
Laura Niebling says
Thanks for a great tutorial. I was wondering if you could sew in the interface as you are sewing the ears together?
Thank you for making this tutorial! I’m planning a girls’ trip to Disneyland soon and I’m wondering how many pairs of ears do you think you could make from one runner? I don’t want to order the wrong number!
I didn’t only because it acts as a stabilizer in the middle of the ear. Plus the pattern piece does not allow for seam allowances.
If you placed the pattern pieces carefully I would say maybe 3 per runner. I would order an extra runner just to be safe. If you order from Amazon you can always return it if you dont use it.
Thank you for this tutorial! I’m trying to make several pairs of ears at once for a girls trip. About how many do you think you could get out of each runner?
Carol Witham says
I love this tutorial! I have seen/read so many. This is nice and detailed. Quick question, pardon my ignorance but when you talk about stiff interfacing…which kind? I know nothing about it and there are so many types and weights! Also, once put inside the ears you mention ‘opening it’? So that means the filling will go inside the interfacing and not between the interfacing and the fabric correct?
Hello, I apologize for the confusion let me see if I can answer your questions. As far as interfacing goes your right, it comes in various weights and stiffness, I used a very stiff interfacing. I dont want to sound like I am not answering your question but the best thing to do is ask the sales associate at the fabric store to help you find a fairly stiff interfacing. It is hard to explain without being able to see and feel the different weights of interfacing. This Amazon link might help https://amzn.to/2KUkVok . When I mentioned “opening” the interfacing I was referring to unfolding the interfacing as I had to fold it in thirds to get it to fit through the small opening left in the ear. You are correct the filling/stuffing goes in between the interfacing and the inside/back of the sequin fabric. I put batting on both sides of the interfacing. I just kept putting small amounts inside until I liked the way it looked. Again I apologize for all the confusion. If this does not answer your questions please let me know!
I was wondering what stitch you used to sew the ears?
I just used a straight stitch for all the sewing.
Thanks for sharing this amazing tutorial, I’m gonna try to do my own Minnie ears, hope they look as yours. Greetings from Lima, Perú
Connie Ramirez says
Where do you buy your plastic headbands?