Pink Cake Plate

DIY Sequin Minnie Mouse Ears

by Filed Under: Disney, FEATURED, POPULAR, PROJECTS 32 Comments

YummlyGoogle+Pin

7.You will need the felt covered headband and 3″x16″ piece of sequin fabric.

8.Start at the end and glue the sequin fabric at both ends. The sequin fabric has some give so if you pull it a bit the fabric will curl a bit around the edge of the headband.

9.Trim the sequin fabric and fold over the edge of the headband and glue.

10.Work all the way around the headband until all sequin fabric is secured.

11.Fold grosgrain ribbon about 1/2 inch and glue to headband.

12.Work all the way down the headband until about 1/2 inch from edge, cut ribbon if needed fold and glue edge of ribbon to end of headband.

You are done with the headband and can move on to the ears!

Comments

  1. D-Girls says:
    July 25, 2017 at 2:32 PM
    Thank you pretty much for this complete tutorial, hope it's easy as it seems. We are 3 college girls from Mexico, who loves Disney, so we have just a few minnie mouse ears from Disneyland. This tutorial help us so much, we'll put in practice. Again, thank you !!
  2. Jessie beck says:
    July 29, 2017 at 11:10 AM
    I'm so excited to try these out for the next time I'm in the parks! Such a great post:)
  3. Katy says:
    August 23, 2017 at 6:50 PM
    Hey Laura, what colour felt would you recommend layering the Rose Gold sequin fabric with? Pink?
  4. Laura says:
    August 24, 2017 at 2:05 PM
    Katy, Yes I used a light pink to line the rose gold ears!
  5. Rebecca says:
    October 11, 2017 at 4:52 PM
    Hi, roughly how wide are the headbands that you use? Thanks!!
  6. Laura says:
    October 11, 2017 at 6:26 PM
    Rebecca the headbands I use are about one inch wide.
  7. Brenda Angell says:
    October 17, 2017 at 8:56 PM
    I worry about the sequins messing up my sewing machine, will they?
  8. Laura says:
    October 19, 2017 at 7:27 AM
    Brenda,I had no problem with the sequins and my sewing machine.
  9. lisa says:
    November 1, 2017 at 10:30 AM
    I'm excited to try these, Thank you for sharing!
  10. Diana Birlean says:
    November 2, 2017 at 12:16 PM
    Are the headbands you got from Amazon bigger than the ones used by Disney? My problem is that the ones from Disney squeeze my head and I can't wear them longer than to take a quick picture. Thank you for the great tutorial.
  11. Laura says:
    November 5, 2017 at 12:33 PM
    Diana, I have the same problem and honestly it is just trial and error as to the size of the headband. If I were you I would use a headband you already own that doesn't hurt your head. If that is an option.
  12. kathy says:
    December 31, 2017 at 1:21 PM
    These are beautiful where did you purchase your sequin fabrics ?
  13. Laura says:
    December 31, 2017 at 3:35 PM
    Thank you! I have listed resources on the last page.
  14. Dot says:
    February 3, 2018 at 11:04 AM
    Love this!!!! I mistakenly ordered 1/2" Headbands from Amazon and they are def not wide enough!!! Can you tell me which headbands you ordered? Are they satin covered and do you get the ones with teeth? Thank you so much!!!
  15. Katie says:
    February 8, 2018 at 10:08 AM
    Thank you for sharing - I am so excited to make these! I was just wondering if the ears stay up well or if they flop around. I have made ears with fabric over cardboard and they were very sturdy, so I'm wondering how these will be once they're all put together.
  16. Laura says:
    February 11, 2018 at 8:31 PM
    Katie, They stand very well just like the ones you buy in the Parks!
  17. Laura says:
    February 11, 2018 at 8:32 PM
    Dot, I use one inch wide headbands and I pick them up where ever I can find them! I have even found some at the dollar store! Good luck!
  18. Christy says:
    March 17, 2018 at 6:20 AM
    What size felt did you buy. The 4x4 or 8x12
  19. Laura says:
    March 17, 2018 at 1:40 PM
    I used the 8"x12".
  20. Laura Niebling says:
    May 7, 2018 at 8:59 PM
    Hi Laura, Thanks for a great tutorial. I was wondering if you could sew in the interface as you are sewing the ears together?
  21. Danielle says:
    May 8, 2018 at 11:53 PM
    Thank you for making this tutorial! I'm planning a girls' trip to Disneyland soon and I'm wondering how many pairs of ears do you think you could make from one runner? I don't want to order the wrong number!
  22. Laura says:
    May 9, 2018 at 7:44 AM
    I didn't only because it acts as a stabilizer in the middle of the ear. Plus the pattern piece does not allow for seam allowances.
  23. Laura says:
    May 9, 2018 at 7:45 AM
    If you placed the pattern pieces carefully I would say maybe 3 per runner. I would order an extra runner just to be safe. If you order from Amazon you can always return it if you dont use it.
  24. Danielle says:
    May 9, 2018 at 11:04 AM
    Thank you for this tutorial! I'm trying to make several pairs of ears at once for a girls trip. About how many do you think you could get out of each runner?
  25. Carol Witham says:
    July 9, 2018 at 12:25 AM
    Great tutorial.
  26. ten says:
    July 12, 2018 at 12:31 PM
    I love this tutorial! I have seen/read so many. This is nice and detailed. Quick question, pardon my ignorance but when you talk about stiff interfacing...which kind? I know nothing about it and there are so many types and weights! Also, once put inside the ears you mention 'opening it'? So that means the filling will go inside the interfacing and not between the interfacing and the fabric correct?
  27. Laura says:
    July 12, 2018 at 6:38 PM
    Hello, I apologize for the confusion let me see if I can answer your questions. As far as interfacing goes your right, it comes in various weights and stiffness, I used a very stiff interfacing. I dont want to sound like I am not answering your question but the best thing to do is ask the sales associate at the fabric store to help you find a fairly stiff interfacing. It is hard to explain without being able to see and feel the different weights of interfacing. This Amazon link might help https://amzn.to/2KUkVok . When I mentioned "opening" the interfacing I was referring to unfolding the interfacing as I had to fold it in thirds to get it to fit through the small opening left in the ear. You are correct the filling/stuffing goes in between the interfacing and the inside/back of the sequin fabric. I put batting on both sides of the interfacing. I just kept putting small amounts inside until I liked the way it looked. Again I apologize for all the confusion. If this does not answer your questions please let me know! Laura
  28. Brenda says:
    August 20, 2018 at 10:20 PM
    I was wondering what stitch you used to sew the ears?
  29. Laura says:
    August 21, 2018 at 10:45 AM
    Hello Brenda, I just used a straight stitch for all the sewing.

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge

Subscribe to Pink Cake Plate Emails!